| AC Power Cycling & Sequencing
Rugged AC SMARTStart®
• Remote power cycling by means of SNMPv2, TCP/IP, telnet, or RS- 232 serial
console port (Web is also an option)
• Monitors line voltage, circuit breaker status, and external temperature
• Monitors aggregate load draw for entire power strip (individual load
monitoring possible)
• Outlets power up in user-defined sequence
• Cold and hot start set ups for use in climate controlled MEP Cases (Option)
- Permits sealed mission case operation in harsh environments
"Optional" Rugged AC SMARTStart® Cold & Hot Start Set Up Feature
Incorporates a structured environmental power feature to enable a cool down or hot start mode
depending on "ambient" temperature in the enclosure the PDU occupies.
If the temp, exceeds the preset Hot Start threshold, the PDU shall energize the cooling unit until the temp.
drops below the threshold and margin. If the temp, is less than the preset cold start threshold, the PDU shal
energize the heater until the temp, rises above the threshold and margin.
| | | |
| Input Characteristics |
| Voltage |
120VAC Nominal, 132 Max. |
| Frequency |
50/60 Hz. |
| Current |
20A Maximum |
| Load Capacity |
2.40 KVA |
| Overload Protection |
1x 1P/20A UL489 Circuit Breaker |
| Power Cord |
12' Material: SOOW,10/3-600V |
| Connector |
5-20P |
| Output Characteristics |
| Voltage |
120VAC |
| Current |
20A Total Combined Load |
| Outlets |
8X(5-20R),12A Max Per Outlet |
| Mechanical Characteristics |
| Material |
CRS |
| Finish |
Powder Coated,Black |
| Lettering |
Silk-Screen,White |
| Storage Temp. |
-40°C to 60°C |
| Operating Environment |
| Temperature |
-40°C to 60°C |
| Relative Humidity |
0 to 95% (Non-Condensing) |
| Elevation |
0 to 10,000FT (0 to 3000 m) |
| Surge Protection |
| Line To Neutral |
| Line To Ground |
| Max. Surge Current |
10k amps 8/20 s pulse |
| Max. Energy |
100 Joules |
| Max. Clamping Voltage |
340 Volts 8/20 s @ 100 Amps |
| Network Interface |
| Connector |
MIL-C-26482 (Shell Sz. 18, Box Mnt) |
| Jack |
RJ-45 |
| Standard |
IEEE 802.3 |
| Data Rate |
10/100 mbps (Auto-Sense) |
| Physical Layer |
10/100 Base-T |
| Network Functions |
Telnet, SNMP |
| PDU Functions |
| Temperature Monitoring |
| Aggregrate Voltage and Current Monitoring |
| Outlet Sequencing |
| Outlet 1-8 User Controlled |
| Hour Useage Meter |
| | | |
| |
